Sunday, June 12, 2011

Rolling Window Shade Tutorial

Enjoy!


Items Needed:

a few clamps (clothespins and balloon weights work well)
card stock of your color choice
patterned paper of your choice
a small dowel
a toothpick
tacky glue
craft glue stick
scissors
straight cutter (or something to ensure you get a straight cut)
embroidery thread

Step 1:
Measure your window from outer edge of frame to outer edge of frame. Cut your dowel to this length. If your window is bigger than the length of a toothpick, substitute a smaller diameter dowel, of an appropriate length.

Step 2:
Decide if you want your shade all the way down or how partially down you would like it. From here on, I will have a partially down window shade. You will need to cut a piece of the card stock that is just (1/8"-1/4") narrower on each side of the dowel.
Example: If your dowel is 3" then cut your paper between 2 1/2"-2 3/4" wide.

I cut my paper 2 1/2" x 3" for this tutorial.




Step 3:
Dry roll the paper around the dowel to give a started curve. This makes it much easier, I promise! Run some tacky glue and smooth it out down your pre-rolled curve. Wrap this around the dowel and hold firmly. Use a toothpick to put a bit of glue on the top back edge of the paper. Roll it a little bit more and then clamp.




Step 4:
While that is drying, cut your second paper or fabric to size matching the length of unrolled paper. You can go from edge to edge or you can leave a sliver on each side of the secondary fabric to show the card stock ( I prefer this look.)




Step 5:
Un-clamp the rolled part and use the Craft Glue stick (I use an Elmer's one. The tube is orange and you can find it at Walmart in the scrap booking aisle) to apply glue on the flat part of the paper (what will be the shade). Glue down your secondary paper/fabric.




Step 6:
At the bottom of the shade, glue the toothpick or smaller dowel using a thin strip of tacky glue. Wait for this to dry.
*** You can choose to leave it this way OR you can roll it up, glue and clamp OR you can skip this and use the next step.

Alternative Step 6:
Cut a small strip of paper same width as the shade but maybe only 1/2" tall. Glue the toothpick or small dowel to the bottom and roll up, (same as the beginning steps of the shade) leaving some paper exposed for the next step.









Step 7:
Use tacky glue to attach the strip of paper to the back of the shade, making sure that the edge of the shade is pushed up slightly under the paper rolled toothpick.





Step 8:
Tie a small slip knot in on the end of the thread. Cut off the excess length from one end of the knot. On the other end, cut about 1" or so. Put some glue on the long end and then attach to the back of the shade, creating a pull down string.





Ta-da! A pull down shade. :)




Another peek!

And a tutorial when I get the time. :)

I made these for my window(s) in the Spring Fling. Not sure which one(s) I will use, but I totally love them!






I took the pictures kind of late, so I apologize for the darkness to it.


Wednesday, June 1, 2011

34 Days to Go!

Usually, by now, fans of Greenleaf's Spring Fling would be drooling massive amounts all over their keyboards. Since Dean changed the deadline this year, we are all going through a bit of *eye candy withdrawal* and it was suggested that there be a few more teasers sent out into the ether. :)

Here is mine:




There has been some speculation as to what I am doing. Hippie crash pad, retro disco, a kindergarten, funfair.... All of which are fabulous ideas. But are they correct?!

Stay tuned to find out more and be ready for the post on July 5th when I do the BIG REVEAL. It will be huge so make sure you come with sustenance. ;)

Thursday, May 19, 2011

Time a peek at the fling?

So, would you believe I am far enough along that this is all I can show you?!?! Everything else would give away major WOW details for the outside or accessories on the inside that would give away exactly what I am doing.

Here is a door that is stained Miniwax Bombay Mahogany and a door knob that I scuffed up and painted silver. I really despise that garish brass they come in. Blech.



Trying something new

There had been a lot of talk about people making spiral staircases on the Greenleaf Forum and I thought, why not? I gave it a shot, and this is what I came up with. I will probably use it on one of the many many kits I have lying about. :) Or in the fling. Not sure.

Here it is: Houseworks ballasters, a dowel with straw spacers, basswood steps, fun beads for decor and tiny silver chain. It was a lot of fun and next time, it could use a little bit of tweaking...

Remember to tell me what you think!








Minis from Roma!!

I recently participated in a swap over at Dale's Dreams and I got my package from Sonya not long after Mother's Day. You can check her stuff out here at her blog. Too cute!




I was happy to get such a well packaged gift. I always worry about mini's traveling, but these made it quite safely. Sonya sent me a cute little blue and yellow basket with goodies in it that I totally love! The bottles are so cute and shabby, but totally realistic. I love it and I can't wait to eventually set them up in the Highland. ♥



She also sent me a Rome souveniour kit, that from what I gather, is based off of stuff from a movie? Correct me if I am wrong Sonya. :)

It includes a table poster, a box, a bunch of teeny postcards, a book and... a tiny VESPA!!! I love it! What fabulous little minis. Thank you so much Sonya!





Now check out this fabulously tiny postcard! I think they will all have to be pasted around a mirror along with other Italian memories. ;)





I used directions from Ann over at Amazing Miniatures to make a photobox to take pictures of these. Go over there to check out this awesome, totally helpful post about making your own box at home to take fabulous pictures. :)


Tuesday, May 10, 2011

Mini's mini's everywhere!



Since I can't share what I have been working on for the Spring Fling (Top Secret!) I thought I would share our littlest mini members of the family and the swap I did with Dale of Dale's Dreams. :) Don't want to leave you guys hanging forever!!

Please meet Thing 2 and That One. They are Cayce and Charlie's turtles- yellow bellied sliders, to be exact. They are teeny and great! We wanted to get them pets, but nothing that was really high maintenance or that involved a crochety nocturnal animal. We settled on these and figured we would work up to a dog later down the road. Cayce picked their names. On this particular day, we took them outside so they could stretch their legs and bask in the sunlight a bit. They are really quick for such tiny little dudes! As hatchlings, they are only 2.5" inches from nose to tail. Too cute!










As for the swap, I was to trade with Cecilia Colo. This was my second time sending something out of the country (she is in Mexico) and what a pain! The postal service here is quite redundant! I had to fill out a customs form with her name, address and declaration of contents which they then stick to the package. THEN I had to write it AGAIN on the package itself, even though they just stuck the sticker with it on there on the package. *Rawrg* It was quite aggravating. (Only because, I feel, foreign addresses are a bazillion miles long!)

So there was a rant.... unintentional, but there... I ended up sending her three things, two of which were mini and one thing that was life size, but still small by normal standards.

I sent her a 6x6 painting that I did and a mini replica of it, along with a pink and purple quilt that I made. I forgot to get pictures of that though. :/ Oops. For now, here are the paintings!